Sie sind nicht angemeldet.
Kunststoff-Spritzgießmaschinen
ab Standort 52-407 Breslau


Besichtigung: 17.06.2024 von 09-16 Uhr
auslaufend am: 19.06.2024 ab 10 Uhr
Abholung: nach vorheriger Terminabsprache in der Zeit vom 24.06.-05.07.2024 (KW 26+27)

Verladepauschale pro Maschine: € 420,00 zzgl. MwSt.

Die Maschinen wurden vor Ort bereits demontiert.


Standort:
Dopak Sp. z.o.o., ul. E. Kwiatkowskiego 5a, 52-407 Breslau, Polen
Positionsliste (Download)


Seiten:  << Zurück 1 2
zu Pos.-Nr.: 
Positions-Nr.,   BezeichnungStartpreis €Anzahl
Gebote		aktuelles
Gebot €		Position endet
am / um
Pos. 23plastic injection molding machine
Fabrikat: Engel, Typ: Victory 330/150 TECH PRO, Baujahr: 2003, Seriennummer: 49833, clamping force 1500 kN; mounting plate dimensions 520 x 750 mm; clearance between columns: TIE-BAR-LESS; min./max. mold height min 300 mm; min./max. mold height min 300 mm; maximum opening width 600 mm; screw diameter 30 mm; injection volume 113 cm3; shot weight 103 g; injection pressure 2180 bar; net weight with control cabinet 9,1t; operating hours: 59727.


11.500,0019.06.2024
10:33:20
Pos. 24plastic injection molding machine
Fabrikat: Engel, Typ: ES 3550/550 K, Baujahr: 1998, Seriennummer: 34166, clamping force 5500 kN; mounting plate dimensions 1345 x 1280 mm; clearance between columns 915 x 860 mm; min./max. mold height min 310 x 800 mm; min./max. mold height min 310/800 mm; maximum opening width 850 mm; screw diameter 80 mm; injection volume 1960 cm3; shot weight 1765 g; injection pressure 1730 bar; net weight with control cabinet 10t; operaing hours: 78964.


8.100,0019.06.2024
10:35:00
Pos. 25plastic injection molding machine
Fabrikat: Stork, Typ: SX-N 12000-8600, Baujahr: 2001, Seriennummer: X82260, clamping force 12000 kN; mounting plate dimensions 1146 x 1696 mm; clearance between columns 1200 x 1200 mm; min./max. mold height min 500- 1695 mm; maximum opening width 2000 mm; screw diameter 100 mm; injection volume 4800 cm3; shot weight 4363 g; operating hours: 61133.


29.700,0019.06.2024
10:36:40
Pos. 26plastic injection molding machine
Fabrikat: Demag, Typ: Concept 300-630/2300, Baujahr: 2006, Seriennummer: 87 880 078, clamping force 3000 kN; mounting plate dimensions 950 x 950 mm; clearance between columns 630 x 630 mm; screw diameter 80 mm; injection volume 1583 cm3; shot weight 1430 g; injection pressure 1437 bar; net weight with control cabinet 14,6t; operating hours: 49875.


13.500,0019.06.2024
10:38:20
Pos. 27plastic injection molding machine
Fabrikat: Demag, Typ: Ergotech 160 430 Extra, Baujahr: 2005, Seriennummer: 7896-1073, clamping force 1600 kN; mounting plate dimensions 770 x 770 mm; clearance between columns 520 x 520 mm; min./max. mold height min 275/685 mm; maximum opening width 500 mm; screw diameter 40 mm; injection volume 231 cm3; shot weight 260 g; injection pressure 1600 bar; net weight with control cabinet 6,5t; operating hours: 78985.


10.692,0019.06.2024
10:40:00
Pos. 28plastic injection molding machine
Fabrikat: Battenfeld, Typ: HM 500/5100, Baujahr: 2006, Seriennummer: 130043-100, clamping force 5000 kN; mounting plate dimensions 1470 x 1260 mm; clearance between columns 900 x 720 mm; min./max. mold height min 450 mm; maximum opening width 1600 mm; screw diameter 85 mm; injection volume 2412 cm3; shot weight 2195 g; injection pressure 2110 bar; net weight with control cabinet 26t; operating hours: 57708.


29.160,0019.06.2024
10:41:40
Pos. 29plastic injection molding machine
Fabrikat: Ferromatik, Typ: Milacron K-TEC 275 S, Baujahr: 2007, Seriennummer: 555609, clamping force 2750 kN; mounting plate dimensions 970 x 970 mm; clearance between columns 630 x 630 mm; min./max mold height min 345 mm; screw diameter 60 mm; injection volume 763 cm3; shot weight 694 g; injection pressure 2144 bar; net weight with control cabinet 15,5t; operating hours: 59878.


10.692,0019.06.2024
10:43:20
Pos. 30plastic injection molding machine
Fabrikat: Arburg, Typ: 520c 2000-675, Baujahr: 2002, Seriennummer: 174001, clamping force 2000 kN; mounting plate dimensions 685 x 685 mm; clearance between columns 520 x 520 mm; min./max. mold height min 250 mm; screw diameter 45 mm; injection volume 139 cm3; shot weight 240 g; injection pressure 2500 bar; net weight with control cabinet 6,63t; operating hours: 73435.


6.426,0019.06.2024
10:45:00
Pos. 31plastic injection molding machine
Fabrikat: Engel, Typ: Victory 1050h/500w/80v 260 combi 3k, Baujahr: 2010, Seriennummer: 174118, clamping force 2600 kN; clearance between columns: TIE-BAR-LESS; screw diameter 60 mm; injection volume 608 cm3; shot weight 669 g; injection pressure 1725 bar; net weight with control cabinet 22,2t; operating hours: 34567.


21.060,0019.06.2024
10:46:40
Pos. 32plastic injection molding machine
Fabrikat: Demag, Typ: Ergotech System 3300-1450/310 2K, Baujahr: 2002, Seriennummer: 8790559, clamping force 3300 kN; mounting plate dimensions 1040 x 950 mm; clearance between columns 710 x 630 mm; min./max. mold height min 330/710 mm; maximum opening width 1385 mm; screw diameter 70 mm; injection volume 1039 cm3; shot weight 940 g; injection pressure 1400 bar; net weight with control cabinet 15,5t; operating hours: 77209.


6.966,0019.06.2024
10:48:20
Pos. 33plastic injection molding machine (Zuschlag unter Vorbehalt)
Fabrikat: Battenfeld, Typ: TM4500/2800, Baujahr: 2001, Seriennummer: 57213, clamping force 4500 kN; mounting plate dimensions 1155 x 1195 mm; clearance between columns 800 x 800 mm; min./max. mold height min 425/770 mm; maximum opening width 1530 mm; screw diameter 75 mm; injection volume 1657 cm3; shot weight 1506 g; injection pressure 1739 bar; net weight with control cabinet 21t; operating hours 78072.


7.506,0019.06.2024
10:50:00
Pos. 34plastic injection molding machine
Fabrikat: Battenfeld, Typ: TM 3500 / 1900, Baujahr: 2004, Seriennummer: 90118, clamping force 3500 kN; mounting plate dimensions 1010 x 1010 mm; clearance between columns 710 x 710 mm; min./max. mold height min 300/710 mm; maximum opening width 1380 mm; screw diameter 65 mm; injection volume 1078 cm3; shot weight 981 g; injection pressure 1777 bar; net weight with control cabinet 15,2t; operating hours 59220.


10.206,0019.06.2024
10:51:40
Pos. 35plastic injection molding machine
Fabrikat: Arburg, Typ: 370C 800-350, Baujahr: 2005, Seriennummer: 198600, clamping force 800 kN; mounting plate dimensions 570 x 570 mm; clearance between columns 370 x 370 mm; min./max. mold height min 250/500 mm; maximum opening width 750 mm; screw diameter 45 mm; injection volume 230 cm3; shot weight 210 g; injection pressure 1670 bar; net weight with control cabinet 3,18t; operating hours: 64321.


7.290,0019.06.2024
10:53:20
Pos. 36plastic injection molding machine
Fabrikat: Krauss Maffei, Typ: KM 450-3500 C3, Baujahr: 2008, Seriennummer: 61012560, clamping force 4500 kN; mounting plate dimensions 1270 x 1200 mm; clearance between columns 900 x 800 mm; min./max. mold height min 480 mm; maximum opening width 1650 mm; screw diameter 90 mm; injection volume 1953 cm3; shot weight 1777 g; injection pressure 1742 bar; net weight with control cabinet 26,3t; operating hours: 67976.


18.900,0019.06.2024
10:55:00
Pos. 37plastic injection molding machine
Fabrikat: Battenfeld, Typ: TM4500/2800, Baujahr: 57742, Seriennummer: 2001, clamping force 4500 kN, mounting plate dimensions 1.155 x 1.195 mm, clearance between columns 800 x 800 mm, min./max. mold height min 425/770 mm, maximum opening width 1.530 mm, screw diameter 75 mm, injection volume 1.657 cm³, shot weight 1.506 g, injection pressure 1.739 bar, net weight with control cabinet 21 t, operating hours 86.068


7.506,0019.06.2024
10:56:40
Pos. 38plastic injection molding machine
Fabrikat: Battenfeld, Typ: TM4500/2800, Baujahr: 57741, Seriennummer: 2001, clamping force 4500 kN, mounting plate dimensions 1.155 x 1.195 mm, clearance between columns 800 x 800 mm, min./max. mold height min 425/770 mm, maximum opening width 1.530 mm, screw diameter 75 mm, injection volume 1.657 cm³, shot weight 1.506 g, injection pressure 1.739 bar, net weight with control cabinet 21 t, operating hours 76.139


7.506,0019.06.2024
10:58:20
Seiten:  << Zurück 1 2
 
 

Industrierat West GmbH & Co. KG
Heinrich-Hertz-Str. 44
D-40699 Erkrath

    +49 211 313566 0
    +49 211 313566 60
    info@industrierat-west.de

 

 

ISO 9001 zertifiziert.
Qualität lohnt!

 

Ralf Schwarz: von der IHK Köln öffentlich bestellter und vereidigter Versteigerer und Sachverständiger für Maschinen und industrielle Anlagen.

 

Newsletter

Abonnieren Sie unseren NEWSLETTER und erhalten Sie alle News über unsere Auktionen direkt in Ihr E-Mail-Postfach. Registrieren Sie sich und setzen den Haken bei "NEWSLETTER". Bitte beachten Sie hierzu unsere DATENSCHUTZERKLÄRUNG!