Sie sind nicht angemeldet.

! In Vorbereitung !

Kunststoff-Spritzgießmaschinen

ab Standort Polen


weitere Daten folgen.
Positionsliste (Download)
Seiten:  1 2  Vorwärts >>
zu Pos.-Nr.: 
Positions-Nr.,   Bezeichnung
Pos. 1plastic injection molding machine
Fabrikat: Krauss Maffei, Typ: KM 150-520 C2 + LR 100, Baujahr: 2005, Seriennummer: 61006519, clamping force 1500 kN; mounting plate dimensions 780 x 790 mm; clearance between columns 500 x 500 mm; min./max. mold height min 300 mm; maximum opening width 900 mm; screw diameter 45 mm; injection volume 275 cm3; shot weight 250 g; injection pressure 1878 bar; net weight with control cabinet 7,1t; operating hours: 55096; peripheral: robot LR 100.


Pos. 2plastic injection molding machine
Fabrikat: ENGEL, Typ: DUO 3550/650, Baujahr: 2006, Seriennummer: 161399, clamping force 6500 kN; mounting plate dimensions 1465 x 1360; clearance between columns 1025 x 930 mm; min./max. mold height min 450/950 mm; maximum opening width 1800 mm; screw diameter 90 mm; injection volume 2480 cm3; shot weight 2254 g; injection pressure 2300 bar; operating hours: 78000; peripheral: robot.


Pos. 3plastic injection molding machine
Fabrikat: ENGEL, Typ: DUO 3550/650, Baujahr: 2006, Seriennummer: 161394, clamping force 6500 kN; mounting plate dimensions 1465 x 1360; clearance between columns 1025 x 930 mm; min./max. mold height min 450/950 mm; maximum opening width 1800 mm; screw diameter 90 mm; injection volume 2480 cm3; shot weight 2254 g; injection pressure 2300 bar; operating hours: 82000; peripheral: robot.


Pos. 4plastic injection molding machine
Fabrikat: Krauss Maffei, Typ: 110-380 CX, Baujahr: 2015, Seriennummer: 61023469, clamping force 1100 kN; mounting plate dimensions 745 x 770 mm; clearance between columns 470 x 470 mm; min./max. mold height min 300/600 mm; maximum opening width 900 mm; screw diameter 35 mm; injection volume 154 cm3; shot weight 140 g; injection pressure 2429 bar; net weight with control cabinet 7,6t; operating hours: 0.


Pos. 5plastic injection molding machine
Fabrikat: Krauss Maffei, Typ: 110-380 CX, Baujahr: 2015, Seriennummer: 61023457, clamping force 1100 kN; mounting plate dimensions 745 x 770 mm; clearance between columns 470 x 470 mm; min./max. mold height min 300/600 mm; maximum opening width 900 mm; screw diameter 30 mm; injection volume 154 cm3; shot weight 140 g; injection pressure 2429 bar; net weight with control cabinet 7,6t; operating hours: 0.


Pos. 6plastic injection molding machine
Fabrikat: Demag, Typ: Extra 100 - 430, Baujahr: 2004, Seriennummer: 7866-1010, clamping force 1000 kN; mounting plate dimensions 540 x 540 mm; clearance between columns 400 x 400 mm; min./max. mold height min 450/500 mm; maximum opening width 750 mm; screw diameter 40 mm; injection volume 231 cm3; shot weight 208 g; injection pressure 2025 bar; net weight with control cabinet 4,8t; production cycles: 251315262.


Pos. 7plastic injection molding machine
Fabrikat: Krauss Maffei, Typ: KM 420 - 3500 C2, Baujahr: 2007, Seriennummer: 61009133, clamping force 4200 kN; mounting plate dimensions 1270 x 1200 mm; clearance between columns 800 x 800 mm; min./max. mold height min 380 / - mm; maximum opening width 1400 mm; screw diameter 90 mm; injection volume 1953 cm3; shot weight 1777 g; injection pressure 1742 bar; net weight with control cabinet 23,2t; operating hours: 77105.


Pos. 8plastic injection molding machine
Fabrikat: Krauss Maffei, Typ: KM 650 - 5700 CM, Baujahr: 2002, Seriennummer: 654319, clamping force 6500 kN; mounting plate dimensions 1530 x 1450 mm; clearance between columns 1000 x 930 mm; min./max. mold height min 400 / - mm; maximum opening width 1550 mm; screw diameter 80 mm; injection volume 1543 cm3; shot weight 1404 g; injection pressure 2205 bar; net weight with control cabinet 45,7t; operating hours: 59156.


Pos. 9plastic injection molding machine
Fabrikat: Krauss Maffei, Typ: KM 110 - 520 C1, Baujahr: 2004, Seriennummer: 61005527, clamping force 1100 kN; mounting plate dimensions 745 x 770 mm; clearance between columns 470 x 470 mm; min./max. mold height min 400 / - mm; maximum opening width 1000 mm; screw diameter 45 mm; injection volume 275 cm3; shot weight 250 g; injection pressure 1878 bar; net weight with control cabinet 6,0t; operating hours: 90648.


Pos. 10plastic injection molding machine
Fabrikat: Krauss Maffei, Typ: KM 650 - 3500 C1, Baujahr: 2003, Seriennummer: 61004358, clamping force 6500 kN; mounting plate dimensions 1510 x 1370 mm; clearance between columns 1000 x 930 mm; min./max. mold height min 600 / - mm; maximum opening width 1750 mm; screw diameter 90 mm; injection volume 1953 cm3; shot weight 1777 g; injection pressure 1742 bar; net weight with control cabinet 35t; operating hours: 93794.


Pos. 11plastic injection molding machine
Fabrikat: Krauss Maffei, Typ: KM 250 - 1400 C2, Baujahr: 2006, Seriennummer: XXX, clamping force 2500 kN; mounting plate dimensions 995 x 1050 mm; clearance between columns 630 x 630 mm; min./max. mold height min 330 / - mm; maximum opening width 1150 mm; screw diameter 60 mm; injection volume 679 cm3; shot weight 618 g; injection pressure 2000 bar; net weight with control cabinet 12,5t.


Pos. 12plastic injection molding machine
Fabrikat: Arburg, Typ: 520c 2000-675, Baujahr: 2002, Seriennummer: 188589, clamping force 2000 kN; mounting plate dimensions 715 x 715 mm; clearance between columns 520 mm; min./max. mold height min 250 / 500 mm; maximum opening width 650 mm; screw diameter 55 mm; shot weight 310 g; injection pressure 1720 bar; net weight with control cabinet 6,63t; operating hours: 74917.


Pos. 13plastic injection molding machine
Fabrikat: Arburg, Typ: 375v 500 100 Vertical, Baujahr: 2012, Seriennummer: 221859, clamping force 500 kN; mounting plate dimensions 504 x 424 mm; clearance between columns: tie-bar-less; min./max. mold height min 200 mm; maximum opening width 450-550 mm; screw diameter 20 mm; injection volume 31 cm3; shot weight 29 g; injection pressure 2500 bar; net weight with control cabinet 3,05t; operating hours: 18000.


Pos. 14plastic injection molding machine
Fabrikat: Battenfeld, Typ: TM 5500/2800, Baujahr: 2004, Seriennummer: 90703, clamping force 5500 kN; mounting plate dimensions 1280 x 1280 mm; clearance between columns 900 x 900 mm; min./max. mold height min 450/800 mm; maximum opening width 900 mm; screw diameter 85 mm; injection volume 2128 cm3; shot weight 1936 g; injection pressure 1354 bar; net weight with control cabinet 33,5t; operating hours: 64800.


Pos. 15plastic injection molding machine
Fabrikat: Krauss Maffei, Typ: KM 180 - 750 AX, Baujahr: 2010, Seriennummer: 61014052, clamping force 5500 kN; mounting plate dimensions 1280 x 1280 mm; clearance between columns 900 x 900 mm; screw diameter 85 mm; injection volume 2128 cm3; shot weight 1936 g; injection pressure 1354 bar; net weight with control cabinet 33,5t; operating hours: 42361.


Pos. 16plastic injection molding machine
Fabrikat: Engel, Typ: ES 1350/250 HL, Baujahr: 2002, Seriennummer: 48245, clamping force 2500kN; mounting plate dimensions 1050 x 900 mm; min./max. mold height min 350-1200 mm; maximum opening width 850 mm; screw diameter 60 mm; injection volume 735 cm3; shot weight 662g; injection pressure 1830 bar; net weight with control cabinet 20t; operating hours: 64649.


Pos. 17plastic injection molding machine
Fabrikat: Toshiba, Typ: IS 650 GTW, Baujahr: 2007, Seriennummer: 780204, clamping force 6500 kN; mounting plate dimensions 1530 x 1530 mm; clearance between columns 1080 x 1080 mm; min./max. mold height min 450/900 mm; maximum opening width 1800 mm; screw diameter 95 mm; injection volume 3150 cm3; shot weight 2900 g; net weight with control cabinet 30t; operating hours: 72000.


Pos. 18plastic injection molding machine
Fabrikat: Toshiba, Typ: IS 450 GSW, Baujahr: 2007, Seriennummer: 713804, clamping force 4410 kN; mounting plate dimensions 1230 x 1230 mm; clearance between columns 870 x 870 mm; min./max. mold height min 450/900 mm; maximum opening width 1800 mm; screw diameter 70 mm; injection volume 1480 cm3; shot weight 1360 g; injection pressure 1780 bar; net weight with control cabinet 22t; operating hours: 69000.


Pos. 19plastic injection molding machine
Fabrikat: Netstal, Typ: SynEnergy 1500-60, Baujahr: 2003, Seriennummer: 2002024001, clamping force 1600 kN; mounting plate dimensions 740 x 750 mm; clearance between columns 460 x 460 mm; min./max. mold height min 250/550 mm; maximum opening width 700 mm; screw diameter 50 mm; injection volume 353 cm3; shot weight 339 g; injection pressure 1890 bar; net weight with control cabinet 11,2t; OPERATING HOURS: 86782.


Pos. 20plastic injection molding machine
Fabrikat: Engel, Typ: Victory 500/150Pro-Tech, Baujahr: 2005, Seriennummer: 158320, clamping force 1500 kN; mounting plate dimensions 750 x 520 mm; clearance between columns: TIE-BAR-LESS; min./max. mold height min 300/900 mm; maximum opening width 600 mm; screw diameter 40 mm; injection volume 251 cm3; shot weight 231 g; injection pressure 1302 bar; net weight with control cabinet 9,6t; operating hours: 53866.


Seiten:  1 2  Vorwärts >>
 
 

Industrierat West GmbH & Co. KG
Heinrich-Hertz-Str. 44
D-40699 Erkrath

    +49 211 313566 0
    +49 211 313566 60
    info@industrierat-west.de

 

 

ISO 9001 zertifiziert.
Qualität lohnt!

 

Ralf Schwarz: von der IHK Köln öffentlich bestellter und vereidigter Versteigerer und Sachverständiger für Maschinen und industrielle Anlagen.

 

Newsletter

Abonnieren Sie unseren NEWSLETTER und erhalten Sie alle News über unsere Auktionen direkt in Ihr E-Mail-Postfach. Registrieren Sie sich und setzen den Haken bei "NEWSLETTER". Bitte beachten Sie hierzu unsere DATENSCHUTZERKLÄRUNG!

Wir nutzen Cookies auf unserer Website. Einige von ihnen sind essenziell für den Betrieb der Seite, während andere uns helfen, diese Website und die Nutzererfahrung zu verbessern (Tracking Cookies). Sie können selbst entscheiden, ob Sie die Cookies zulassen möchten. Bitte beachten Sie, dass bei einer Ablehnung womöglich nicht mehr alle Funktionalitäten der Seite zur Verfügung stehen.

Akzeptieren